Magnetic flip column level meter
Categories :
Description :
Magnetic flip column level meter
Magnetic column level gauge is another type of side-mounted, top-mounted (bottom-mounted) product developed for centralized control. It has the advantages of clear indication on site and remote control. The product can be widely used in petroleum chemical industry, chemical fertilizer, medicine, ships, military and other industries in all kinds of tower, tank, tank and spherical container liquid level indicator.
Measuring range: 300 ~ 15000mm accuracy: ±10mm Diameter of the column: 10mm, 16mm Nominal pressure: 10MPa Medium density: ≥0.7g/cm3 (special requirements up to 0.45g/cm3) Medium temperature: -40 ~ +500℃ Material: stainless steel 304/316/316L/ stainless steel lining ptfe and PP, PVC material,
Medium viscosity: ≤2.0Pa.s Environmental vibration: frequency ≤25Hz amplitude ≤0.5mm follow speed motherland: ≤0.05m/s Flange standard: HG20592 ~ 20635-97
Remote transmission device: 4-20mA two-wire system/alarm: output analog switching signal UHZ type magnetic column level gauge selection table:
| model | code | instructions |
| UHZ | Magnetic flip column level meter | |
| Type of liquid gauge | 1 | Turn over indicator (local display type) |
| 3 | Far pass with flap | |
| Liquid level gauge model | 0 | The base type |
| W | Insulation type | |
| D | insertion | |
| J | The corrosion type | |
| S | Frost prevention type | |
| Z | Heat preservation and corrosion resistance type | |
| Y | Insert corrosion-resistant type | |
| Alarm control | 0 | No alarm |
| 1 | With cap | |
| 2 | With the lower limit | |
| 3 | Take the lower limit | |
| Float material | P | Stainless steel |
| L | Antirust aluminium | |
| T | titanium | |
| S | PVC plastic | |
| F | Fluorine plastic package | |
| The main body material | P | Stainless steel |
| L | Antirust aluminium | |
| T | titanium | |
| S | PVC plastic | |
| F | Fluoride can | |
| PF | Lined with four fluorine | |
| PP | Lined with propylene | |
| PE | Lined with ethylene | |
| Connecting flange | Shown in table a | |
| Medium temperature | See table 2 | |
| Actual service pressure | Shown in table 3 | |
| The proportion of medium | To indicate the | |
| The length of the order | To indicate the | |
| /B | Explosion-proof type |
Discover Related products
Our products are widely used and provide one-stop solutions