Intended Use

Single-use Huber  needles suitable for infusion and drug administration through disposable implantabledrug-supplying devices.

Main Material: Medical grade PP, stainless steel or rubber

SIZE:10.7x16mm，0.7x20mm, 0.7x25mm, 0.7x30mm,0.9x16mm,0.9x20mm, 0.9x25mm, 0.9x30mm,1.1×1 6mm,1.1x20mm,1.1x25mm,1.1 x30mm

Characteristic:

• Non-Latex
• Non-coring
• 90 degrees SUS304 stainless steel needle
• A rotating wing supplies less stress on both the tissue and the port
• Occlusion clamp

Structure Properties Products

Single-use Huber  Needles is sharp and easy to pierce;The needle tip is bent at a certain angle, which makes it difficult to produce debris and cause vascularembolism when puncturing the infusion port;Needle tube with large inner diameter and high flow rate (thin-walled design);The 90 ’curved design of the needle tube, with soft double wings, facilitates fixation and retention;The product doesn’t contain DEHP and should be sterile, pyrogen-free, with a hemolysis rate of lessthan 5%, and without acute systemic toxicity. lt has good biocompatibility.

Notes

Quality Assurance

• Manufacturing process is in compliance with ISO 13485 and ISO 9001 Quality System.